PSM Logic Functions, Values Table Function - GF54.21-D-3214TSA
Model 907
with code ED5 (Parameterisable special module)
Value table block function
he value table block has four 1-bit inputs with filters (F), each of which is assigned an identification number (ID) via the data entry table. The output has a width of 16 bits.
If an input condition is "true", then the value (W1 , W2 , W3 , W4 ) of the assigned signal ID is applied at the output. If multiple values (W1 , W2 , W3 , W4 ) are valid at the same time, then the value (W1 , W2 , W3 , W4 ) with the highest priority (P) in the value table (WT) wins.
CODING VIA DATA ENTRY TABLE
| Designation in data entry table | Data entry bit width | Data bit evaluation | Meaning |
|---|---|---|---|
| B1_G1_WT1_default_value | 16 bit | - | Used signal ID if no input is "true". |
| B1_G1_WT1_value1 | 16 bit | - | Used signal ID if input 1 is "true". |
| B1_G1_WT1_value2 | 16 bit | - | Used signal ID if input 2 is "true". |
| B1_G1_WT1_value3 | 16 bit | - | Used signal ID if input 3 is "true". |
| B1_G1_WT1_value4 | 16 bit | - | Used signal ID if input 4 is "true". |
| B1_G1_WT1_1_signal_ID | 32 bit | 1 bit | Filter + input signal data entry signal ID for value 1 input (W1 ) |
| B1_G1_WT1_2_Signal_ID | 32 bit | 1 bit | Filter + input signal data entry signal ID for value 2 input (W2 ) |
| B1_G1_WT1_3_signal_ID | 32 bit | 1 bit | Filter + input signal data entry signal ID for value 3 input (W3 ) |
| B1_G1_WT1_4_Signal_ID | 32 bit | 1 bit | Filter + input signal data entry signal ID for value 4 input (W4 ) |
SIGNAL ID OF OUTPUT
| Designation in signal ID list | Data bit width | Meaning |
|---|---|---|
| Out_G1_WT1 | 16 bit | Signal ID of output |
The same applies for the other value table blocks with the naming conventions:
- "B<block number>_G<group number>_WT<number>_<input number> ..."
- "Out_G<group number>_WT<number> ..."
| Overview of system components for parameterizable special module (PSM) | GF54.21-D-9998TSA |