Replace Soft Top Compartment Lid - AR77.33-P-1700-01LCA

Model 217.4

MECHANICAL SOFT-TOP COMPONENTS

Number	Designation		Model 217.4
BA77.33-P-1003-02A	Bolt, lock mounting to soft top compartment lid	Nm	10

MECHANICAL SOFT-TOP COMPONENTS

Number	Designation		Model 217.4
BA77.33-P-1009-02A	Nut, trim piece to soft top compartment lid	Nm	4

MECHANICAL SOFT-TOP COMPONENTS

Number	Designation		Model 217.4
BA77.33-P-1010-02A	Bolt, stop buffer to soft top compartment lid	Nm	8

Courtesy of MERCEDES-BENZ USA

Courtesy of MERCEDES-BENZ USA

Courtesy of MERCEDES-BENZ USA

Disassemble/assemble

Mark position for brackets (2) on soft top compartment lid (1).
Transfer marking to new soft top compartment lid (1). Is reference point for position of brackets (2) on new soft top compartment lid (1)

Mark so that the new soft top compartment lid (1) cannot be damaged.
Undo screw/bolts (3) and remove bracket (2) .
Unscrew bolts (4) and remove stop buffer .
Remove clamps (6) and clips (7) for wire.
: Replace clips (7).
Separate electrical connectors.
Unclip wiring harness (5) and remove rubber grommet for central connector.
Unscrew nuts (8) for trim piece and remove trim piece (10) .
If required detach foam gasket below trim piece (10) from soft top compartment lid (1) when removing.
Remove brake lamp (14).
Unclip covers (9) for speaker with assembly wedge.
Unscrew bolts (12) for cover (11).
Unclip cover (11) with assembly wedge.
Unclip midrange speaker (13) from cover (11).
On vehicles with code 811 (Burmester® High-End 3D Surround sound system) additionally unclip tweeter.
Assemble in the reverse order.