Adjust Locking Plate On Soft Top Compartment Lid - AR77.33-P-1705-01LCA
Model 217.4
SOFT TOP COMPARTMENT LID
| Number | Designation | Model 217.4 | ||
|---|---|---|---|---|
| BE77.33-P-1001-02A | Adjustment dimension for locking plate | Basic setting | mm | 4, 8 |
| Fine adjustment | mm | ±2 | ||
MECHANICAL SOFT-TOP COMPONENTS
| Number | Designation | Model 217.4 | |
|---|---|---|---|
| BA77.33-P-1005-02A | Bolt, locking hook to lock mounting | Nm | 10 |
- Loosen bolts (6) on check plate (7).
- Move check plate (7) so that bolts heads (line B) on bolts (6) are adjusted parallel to top edge (line A) of check pate (7).
- Adjust dimension (C) to basic setting with
feeler gauge.
- Perform fine adjustment of check plate (7) by moving parallel on elongated holes with
If necessary.
- Tighten screw/bolts (6)
.