Remove/Install Rear Seat Cushion Padding - AR91.12-P-1022SA

Model 223 

with code 223 (Electric backrest adjustment and head restraints) 

except code 224 (Individual rear seats) 

Model 223 

with code 223 (Electric backrest adjustment and head restraints) 

with code 224 (Individual rear seats) 

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Move driver seat and front passenger seat to foremost position.
2	Move seat cushion padding (1) to foremost position.
3	Pull release lever (2) outward, release seat cushion padding (1) and remove until electrical connectors are accessible.	Ensure that slide elements on seat cushion padding (1) are correctly seated in guides (arrows A). The seat cushion padding (1) must engage audibly in the release lever (2).
4	Unclip electric lines (3) and disconnect corresponding electrical connectors.	The number of electrical connectors can vary depending on the equipment variant.
5	Install in the reverse order.