Remove/Install Front Passenger Airbag - AR91.60-P-0664S
Model 223
| Risk of injury during testing and repair operations related to pyrotechnical components | Do not expose pyrotechnical component parts to temperatures above 100°C or 212°F. Disconnect current supply when working on such component parts. | AS91.00-Z-0008-01A | |
| Topical note | Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | |
| Notes on safety-relevant components | AH00.00-Z-0019-01A | ||
| Information, assessment and legal requirements when working with, handling and storing pyrotechnical components | AH91.00-Z-0000-10A | ||
| Remove/install | |||
| 1 | Switch off ignition and store transmitter key outside of transmission range (min. 2 m). | ||
| 2 | Remove instrument panel. | AR68.10-P-1000S | |
| 3 | Remove nuts (2) and remove front passenger airbag (1). | *BA91.60-P-1001-01I | |
| 4 | Install in the reverse order. | ||
| Check | |||
| 5 | Check Supplemental Restraint System (SRS) with diagnostic device. | ||
| AD00.00-P-2000-06FR |
AIRBAG
| Number | Designation | Model 223 | |
|---|---|---|---|
| BA91.60-P-1001-01I | Nut, front passenger airbag unit to instrument panel | Nm | 5 |