Check Engine Oil Level With Special Tool - AP18.00-P-1810MG
Engine 279
Shown on engine 612
| Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. |
AS00.00-Z-0005-01A | |
| Risk of injury to skin and eyes due to handling of engine oil. Risk of poisoning caused by swallowing engine oil | Wear protective gloves, protective clothing and safety glasses. Do not fill engine oil into beverage containers. |
AS18.00-Z-0001-01A | |
| Preparatory activity | |||
| 1 | Run engine to warm it up. | ||
| 2 | Switch off engine. | ||
| 3 | Pull stop plug (4) out of oil dipstick tube (5). | ||
| Check | |||
| 4 | Insert dipstick (04) into oil dipstick tube (5). | The collar of the handle fitting does not make contact here with the oil dipstick tube (5). |
Fig 1 |
| 5 | Read off engine oil level on dipstick (04). | Fig 1 | |
| 6 | Determine level of engine oil level using oil level table. | Oil level |
*BF18.00-P-1001-03E |
| Correct engine oil level, if engine oil level too high or too low | |||
| 7 | Correct engine oil level. | ||
| Service Information: Oil specification for engine oil changes | Engine 279 in model 217, 222, 223, 231 Engine 279 in model 463 as of model year 1996 (01.09.1996) If the engine oil level is too high, ↓ Extract engine oil to match oil level table. If the engine oil level is too low, ↓ Refill engine oil to match oil level table. |
SI18.00-P-1311A | |
| Finishing activity | |||
| 8 | Insert stop plug (4) into oil dipstick tube (5). |
OIL LEVEL CHECK
| Number | Designation | Engine 279 | ||
|---|---|---|---|---|
| BF18.00-P-1001-03E | Oil level | Minimum | mm | 115 |
| Maximum | mm | 130 | ||
| Oil filling capacity between minimum and maximum | Liter | ≈2 | ||