Remove/Install Electric Parking Brake Switch - AR42.20-P-0505S
Model 223
| Topical note | Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | |
| Notes on safety-relevant components | AH00.00-Z-0019-01A | ||
| Remove/install | |||
| 1 | Remove fuse and relay module on driver's side and place to one side with connected lines. | AR54.15-P-0003S | |
| 2 | Remove damping upstream of electric parking brake switch (S76/15). | ||
| 3 | Disconnect electrical connector from electric parking brake switch (S76/15). | ||
| 4 | Unclip electric parking brake switch (S76/15) (arrows) and remove. | ||
| 5 | Install in the reverse order. |