Remove/Install Cover On Center Console - AR68.20-P-2350S
Model 223
| Topical note | Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | |
| Remove/install | |||
| 1 | Switch off ignition and store transmitter key outside of transmission range (min. 2 m). | ||
| 2 | Unclip cover panel (1). | Fig 1 | |
| 3 | Remove screw/bolts (3). | ||
| 4 | Unclip cover (2) from rear until electrical connector (4) can be accessed. | Fig 1 | |
| 5 | Disconnect electrical connector (4) and remove cover (2). | ||
| 6 | Unscrew bolts (5) and remove upper control panel control unit (N72/1) from cover. | ||
| 7 | Install in the reverse order. |