Remove/Install Additional Brake Lamp - AR82.10-P-5376S
Model 223
| Notice | Notes on avoiding damage to windows installed in special high-security vehicles | Model 223 with code Z07 (B7 armoring on special protection version) |
AH67.00-P-0003-01FB |
| Notice | Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | |
| Remove/install | |||
| 1 | Remove rear flashing lights. | Model 223 with code Y390 (Motorcade assistant) with code Z07 (B7 armoring on special protection version) Model 223 with code Y840 (Rear end blue flashing light) with code Z07 (B7 armoring on special protection version) |
AR82.10-P-0160SG |
| 2 | Pull locks (arrows) outwards using extraction hooks. | Fig 1 | |
| 3 | Unclip additional brake lamp (E21) and disconnect electrical connector. | ||
| 4 | Remove additional brake lamp (E21). | ||
| 5 | Install in the reverse order. |