Remove/Install Bottom Paneling For Dashboard On Passenger Side - AR68.10-P-1502S

Model 223 

Courtesy of MERCEDES-BENZ USA

Topical note	Information on preventing damage to electronic components due to electrostatic discharge		AH54.00-P-0001-01A
	Remove/install
1	Move front passenger seat into the end position toward the rear.
2	Switch off ignition and store transmitter key outside of transmission range (min. 2 m).
3	Remove screws (1).
4	Unclip, detach and lower trim (2) until electrical connectors (3, 4, 5, 6) can be accessed.	There is a catch hook at rear on trim (2).
		Long wedge	Fig 1
5	Disconnect electrical connectors (3, 4, 5, 6).
6	Remove trim (2).
7	Install in the reverse order.

Fig 1: Identifying Long Wedge (115 589 03 59 00)

Courtesy of MERCEDES-BENZ USA