Wiring Diagram For All-Wheel Drive Control Unit - PE28.19-P-2102-97SEA
Model 217, 222 with transmission 725 as of model year 2018
AWD control module N45
| Code: | Designation: | Position: |
|---|---|---|
| A0 | Use of wiring diagrams | 15L |
| B91 | Transmission oil temperature sensor | 14L |
| F1/3 | Passenger-side A-pillar fuse box | 3L |
| F1/3f307 | Fuse 307 | 1K |
| Flex E | Chassis FlexRay | 11K |
| K40/8 | Engine fuse and relay module | 7L |
| K40/8f125 | Fuse 125 | 6L |
| N45 | All-wheel drive control unit | 4A |
| N45 | All-wheel drive control unit | 12A |
| N73 | Electronic ignition switch control unit | 11L |
| W19 | Right front seat crossmember ground point | 2H |
| X18/7 | Vehicle interior and engine compartment electrical connector | 5H |
| X22/4 | Transmission/frame floor assembly connecting point | 1E |
| Z50/5z1 | Tml. 15 connector sleeve | 5G |