Wiring Diagram For Tire Pressure Monitor Control Unit - PE40.15-P-2101-97SEA
Model 217
up to model year 2018
with code 475 (Tire pressure monitoring system)
Control unit N88
Model 222
up to model year 2018
with code 475 (Tire pressure monitoring system)
Control unit N88
| Code: | Designation: | Position: |
|---|---|---|
| A0 | Use of wiring diagrams | 15L |
| A69/1 | Left front tire pressure sensor | 9L |
| A69/2 | Right front tire pressure sensor | 10L |
| A69/3 | Left rear tire pressure sensor | 11L |
| A69/4 | Right rear tire pressure sensor | 12L |
| CAN HMI | User interface CAN | 7K |
| K40/5 | Rear fuse and relay module | 3L |
| K40/5f411 | Fuse 411 | 2L |
| N88 | Tire pressure monitor control unit | 5A |
| U1217 | Valid for model series 217 | 3D |
| U1222 | Valid for model series 222 | 3D |
| W6 | Left wheel arch trunk ground point | 5G |
| X18/35 | Cockpit wiring harness and frame floor assembly electrical connector | 7E |
| X30/20 | User interface CAN (CAN HMI) potential distributor electrical connector | 7L |
| Z1z17 | Circuit 31 connector sleeve | 4G |