Extend MOST Ring For Components To Be Retrofitted - AZ82.60-P-0001-05LF
Model 217, 222, 463
| Topical note | Notes on avoiding damage to optical fibers during repair work | AH82.60-P-0001-05AK |
- Check whether the cover (24) on both fiber-optic cable adapters (26) are in the assembly position as shown.
If the cover (24) on the fiber-optic cable adapters (26) are not in the assembly position.
↓
Move the cover (24) into assembly position.
- Lay fiber-optic cable wiring harness in trunk or in load compartment.
- Release lock (31.1) at black, 6-pin coupling (31) for TV tuner and remove MOST supporting body (32).
- Remove blue retaining clip (30) from MOST supporting body (32).
- Release lock (32.1) on MOST supporting body (32) and remove the vehicle's fiber-optic cable (1x) from contact cavity 1 (input).
- Install the vehicle's own fiber-optic cable (1x) in the fiber-optic cable adapter (26) with the fiber-optic cable (Tx).
The fiber-optic cable (1x) must engage audibly.
- Clip cover (24) onto fiber-optic cable adapter (26) in direction of arrow.
- Release lock (32.2) on MOST supporting body (32) and remove the vehicle's fiber-optic cables (2x) from contact cavity 2 (output).
- Install fiber-optic cables (2x) in fiber-optic cable adapter (26) with fiber-optic cable (Rx).
- Clip cover (24) onto fiber-optic cable adapter (26) in direction of arrow.