Frame Floor Torque Specifications - BA61.10-P-1000-01K
Model 217, 222
MODIFICATION NOTES
| 30.11.2017 | Value changed: Screw/bolt, front diagonal strut to front axle carrier/body |
FRAME FLOOR ASSEMBLY
| Number | Designation | Model 217 | Model 222.0/1/9 | ||
|---|---|---|---|---|---|
| BA61.10-P-1001-01K | Nut, rear crossmember to body | Nm | 55 | 55 | |
| BA61.10-P-1002-01K | Nut, front reinforcement to frame floor assembly | Nm | 50 | 50 | |
| BA61.10-P-1003-01K | Screw/bolt, center reinforcement to frame floor assembly | Nm | 32 | 32 | |
| BA61.10-P-1004-01K | Screw/bolt, rear reinforcement to frame floor assembly | Nm | 50 | 50 | |
| BA61.10-P-1005-01K | Screw/bolt, recess for spare wheel to body | Nm | 23 | 23 | |
| BA61.10-P-1006-01K | Screw/bolt, cross strut to rear elastomer bearing of rear axle carrier | Nm | 23 | 23 | |
| BA61.10-P-1007-01K | Nut, cross strut to spare wheel well/SCR recess | Nm | 50 | 50 | |
| BA61.10-P-1008-01K | Screw/bolt, rear diagonal strut to body | Nm | 50 | 50 | |
| BA61.10-P-1009-01K | Screw/bolt, rear diagonal strut to bracket/spare wheel well | Nm | 50 | 50 | |
| BA61.10-P-1010-01K | Nut, rear diagonal strut to stop plate | Nm | - | 50 | |
| BA61.10-P-1011-01K | Screw/bolt, rear diagonal strut bracket to body/spare wheel well | M8 | Nm | 23 | - |
| M10 | Nm | - | 50 | ||
| BA61.10-P-1012-01K | Nut, auxiliary spring mounting console to body | Nm | - | 28 | |
| BA61.10-P-1013-01K | Screw/bolt, wheel well guard plate to body | Nm | - | 28 | |
| BA61.10-P-1014-01K | Screw/bolt, center diagonal strut to body/reinforcement | Nm | 50 | - | |
| BA61.10-P-1015-01K | Screw/bolt, center diagonal strut to center diagonal strut | Nm | 17 | - | |
| BA61.10-P-1016-01K | Screw/bolt, rear diagonal strut to bracket (to stop plate) | Nm | 50 | - | |
| BA61.10-P-1017-01K | Nut, rear diagonal strut bracket to stop plate | Nm | 50 | - | |
| BA61.10-P-1018-01K | Screw/bolt, front diagonal strut to front axle carrier/body | M8 | Nm | 17 | 17 |
| M10 | Nm | 50 | 50 | ||