000 588 13 21 00 Wheel Alignment System - WS40.00-P-0013B

Model all (4xWD, CAR, Light transporter, smart)

Use in FG 40/Set B

Purpose:

Car suspension measuring unit for measuring suspension geometry.

Test equipment category CAT_B.

Procurement information:

This workshop equipment is not sold through the regular replacement part ordering process in GLC/LC, but instead directly through the manufacturer/supplier. Recommended workshop equipment and information about the manufacturers/supplier is available below.

Fig 1: Identifying Wheel Alignment System (000 588 13 21 00)

Courtesy of MERCEDES-BENZ USA

NOTE: The wheel alignment systems listed here operate according to one of the following measuring methods

Electronic with 3D camera technology
Electronic with radio frequency

The suspension geometry on heavy-duty vans from Mercedes-Benz can also be measured using the wheel alignment systems listed below.

Manufacturer 1:

http://www.corghi.de

Type/model: Exact 7000MB
Article no.: 0-33107201/31

Manufacturer 2:

http://de.hunter.com/oem/Mercedes-Benz

Type/model: HTA-MB-TD
Article number: HTA-MB-TD

Manufacturer 3:

Snap-on Equipment srl

https://eu.johnbean.com

https://eu.hofmann-equipment.com

Type/model: John Bean - V3400 MB-1
Article no.: EEWA553MB1
Type/model: Hofmann - geoliner 790 MB-1
Article no.: EEWA753MB1

Manufacturer 4:

https://www.ravaglioli.com

Type/model: Ravaglioli - RAVTD3000HPMB
Article no.: RAVTD3000HPMB
Type/model: Butler - SPEED3DHPMB
Article no.: SPEED3DHPMB
Type/model: Space - ARP3DHPMB
Article no.: ARP3DHPMB

Manufacturer 5:

https://www.BRBunited.com

Type/Model: RWATD3000HPMB
Article no.: RWATD3000HPMB