Align Clamp Between Turbocharger And Catalytic Converter - AR09.40-P-6018-01MNL
Engine 176 in model 167
Engine 176 in model 217, 222
EXHAUST SYSTEM
| Number | Designation | Model 217, 222 with engine 176 | |
|---|---|---|---|
| BA49.10-P-1001-02N | Clamp, front exhaust system to turbocharger | Nm | 20 |
EXHAUST SYSTEM
| Number | Designation | Model 167 with engine 176 | ||
|---|---|---|---|---|
| BA49.10-P-1001-02W | Screw/bolt, catalytic converter clamp to exhaust gas turbocharger | M6 | Nm | 8 |
| M8 | Nm | 23 | ||
- Attach the upper part of the clamps (1) and the lower part of the clamps (2) to the respective ATL in such a way that the noses (3) of the lower part of the clamps (1) stand on the left next to the stay (4).
The stay (4) must never stand between the noses (3). Correct assembly cannot be assured otherwise.
- Screw in bolts (5) Engine 176 in model 217, 222
Engine 176 in model 167
Tighten screws/bolts (5) alternately.