Remove/Install 360° Front Camera - AR54.30-P-3001LC
Model 217
with code 501 (360° camera)
MODIFICATION NOTES
| 7.10.15 | "Perform initial startup of front 360° camera using the diagnostic system" added | Operation step 6. |
| Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | ||
| Remove/install | |||
| 1 | Remove front bumper | AR88.20-P-2000LC | |
| 2 | Disconnect electrical connector (1) | ||
| 3 | Release retaining lug (arrows) and unclip cover (2) | ||
| 4 | Remove front 360° camera (B84/9) | ||
| 5 | Install in the reverse order | ||
| 6 | Commission front 360° camera (B84/9) using the diagnostic system | If the front 360° camera (B84/9) was replaced. | |
| AD00.00-P-2000-04B | |||
| 7 | Calibrate front 360° camera (B84/9) using the diagnostic system | ||
| AD00.00-P-2000-04B |