Remove/Install Outside Door Handle On Front Door - AR72.10-P-2400LC
MODEL 217
| Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof. | No parts of the body or limbs should be within the operating area when the components are moving. | AS00.00-Z-0011-01A | |
| Remove/install | |||
| 1 | Remove cap (1) | ||
| 2 | Unclip seal (2) until bolt (3) is accessible | ||
| 3 | Loosen bolt (3) | ||
| 4 | Pull door handle (4) and lock cylinder (5) | If the retainer does not arrest, remove door lock and tension spring. ↓ Remove door lock |
AR72.10-P-4011LC |
| 5 | Install in the reverse order |