Remove/Install Overhead Control Panel Control Unit - AR82.20-P-1000LCA
Model 217.4
| Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | ||
| Remove/install | |||
| 1 | Transfer basic data from overhead control panel control unit (1) to diagnostic unit | When replacing the overhead control panel control unit (1). | |
| AD00.00-P-2000-04B | |||
| 2 | Switch on ignition and store transmitter key outside of transmission range (min. 2 m) | ||
| 3 | Loosen A-pillar trims (3) in top area | AR68.30-P-4050LCA | |
| 4 | Open eyeglasses compartment | ||
| 5 | Remove screw/bolts (2) | ||
| 6 | Unclip overhead control panel control unit (1) from roof frame | ||
| 7 | Release and disconnect electrical connections (4) | ||
| 8 | Remove overhead control panel control unit (1) | ||
| 9 | Install in the reverse order |