Remove/Install Inner Fan Motor Of Front Headlamp Unit - AR82.10-P-4744LFM
Model 217
Model 222
up to model year 2018
with code 640 (SAE dynamic LED headlamps, right-hand traffic)
Model 222
up to model year 2018
with code 641 (Dynamic LED headlamps, left-hand traffic)
Model 222
up to model year 2018
with code 642 (Dynamic LED headlamps, right-hand traffic)
Model 222
with code 631 (Static LED headlamps, left-hand traffic)
Model 222
with code 632 (Headlamps, LED, static, right-side traffic)
Front left lamp unit shown (E1) to model J. 2018
| Topical note | Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | |
| Remove/install | |||
| 1.1 | Remove front left LED matrix lamp unit control unit (E1n11) and/or front right LED matrix lamp unit control unit (E2n11) | Model 222 as of model year 2018 with code 631 (Static LED headlamps, left-hand traffic) Model 222 as of model year 2018 with code 632 (Headlamps, LED, static, right-side traffic) |
|
| 1.2 | Remove left front exterior lights LED actuation module (E1n7) or right front exterior lights LED actuation module (E2n7) | Model 217 Model 222 up to model year 2018 with code 631 (Static LED headlamps, left-hand traffic) Model 222 up to model year 2018 with code 632 (Headlamps, LED, static, right-side traffic) Model 222 up to model year 2018 with code 640 (SAE dynamic LED headlamps, right-hand traffic) Model 222 up to model year 2018 with code 641 (Dynamic LED headlamps, left-hand traffic) Model 222 up to model year 2018 with code 642 (Dynamic LED headlamps, right-hand traffic) |
AR82.10-P-4650LF |
| 2 | Remove bolt (6) | ||
| 3 | Pull out fan motor 2 of the front left lamp unit (E1m5) and/or fan motor 2 of the front right lamp unit (E2m5) until the electrical connection (7) is accessible | ||
| 4 | Release and disconnect electrical connection (7) | ||
| 5 | Remove fan motor 2, left front lamp unit (E1m5) or fan motor 2, right front lamp unit (E2m5) | ||
| 6 | Install in the reverse order |