Remove/Install Additional Brake Lamp - AR82.10-P-5376LCA
Model 217.4
| Risk of injury when performing check and repair work in area of roll bar | Keep body parts out of the area where the roll bar extends. Do not use the cover in the area of the roll bar as a shelf for objects. |
AS91.00-Z-0003-01LCA | |
| Risk of injury . Moving parts can pinch, crush or, in extreme cases even sever extremities. | No parts of the body or limbs should be within the operating area of mechanical components when moving components. | AS00.00-Z-0009-01A | |
| Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | ||
| Remove/install | |||
| 1 | Open soft top and secure soft top compartment lid (1) in vertical position | AR77.30-P-1030-01LCA | |
| 2 | Remove soft top compartment lid cover | AR77.33-P-1700LCA | |
| 3 | Release and disconnect electrical connection (2) | ||
| 4 | Unscrew nuts (8) and remove additional brake lamp (3) | *BA77.33-P-1009-02A | |
| 5 | Install in the reverse order |
MECHANICAL SOFT-TOP COMPONENTS
| Number | Designation | Model 217.4 | |
|---|---|---|---|
| BA77.33-P-1009-02A | Nut, trim piece to soft top compartment lid | Nm | 4 |