Remove/Install Front Stabilizer Bar Linkage - AR32.35-P-3330S
Model 223
except code 490 (Electrohydraulic suspension)
MODIFICATION NOTES
| 02.04.2021 | Nut torsion bar rod to torsion bar | Model 223 with code Z07 (B7 armoring on special protection version) | BA32.20-P-1001-02O |
| 02.04.2021 | Nut, torsion bar linkage to torsion bar | Model 223 with code Z07 (B7 armoring on special protection version) | BA32.20-P-1001-02O |
| 02.04.2021 | Nut torsion bar rod to torsion bar | Model 223 with code Z07 (B7 armour for special protection version) Model 223 with Code Z07 (B7 armour for special protection version) | BA32.20-P-1001-02O |
| 02.04.2021 | Nut torsion bar to steering knuckle | Model 223 except code Z07 (B7 armour for special protection version) | BA32.20-P-1002-02O |
| 02.04.2021 | Nut, torsion bar linkage to steering knuckle | Model 223 with code Z07 (B7 armoring on special protection version) | BA32.20-P-1002-02O |
| 02.04.2021 | Nut torsion bar to steering knuckle | Model 223 with code Z07 (B7 armour for special protection version) | BA32.20-P-1002-02O |
| Notice | Notes on handling, transport and storage of ceramic brake disks | AH42.10-P-9406-13A | |
| Notice | Notes on handling, transport and storage of composite brake disks | AH42.10-P-9406-12LF | |
| Notice | Notes on self-locking nuts and bolts | AH00.00-P-0001-01KOA | |
| Notes on repair work on suspension components | AH00.00-P-0100-01A | ||
| Remove/install | |||
| 1 | Remove corresponding front wheel. | AR40.10-P-1102A | |
| 2 | Detach torsion bar linkage (1) from steering knuckle (2). | *BA32.20-P-1002-02O | |
| 3 | Remove torsion bar linkage (1) from stabilizer (3). | *BA32.20-P-1001-02O | |
| 4 | Pull torsion bar linkage (1) out of steering knuckle (2). | ||
| Check | |||
| 5 | Check ball heads of torsion bar linkage (1) and their boots for condition and damage. | If there is a problem, ↓ |
|
| replace torsion bar linkage (1). | |||
| 6 | Install in the reverse order. |
FRONT AXLE TORSION BAR
| Number | Designation | Model 223 except code 490 (Electrohydraulic suspension) except code Z07 (B7 armoring on special protection version) | Model 223 with code Z07 (B7 armoring on special protection version) except code 490 (Electrohydraulic suspension) | |
|---|---|---|---|---|
| BA32.20-P-1001-02O | Nut, torsion bar linkage to torsion bar | Nm | 100 | 120 |
FRONT AXLE TORSION BAR
| Number | Designation | Model 223 except code 490 (Electrohydraulic suspension) except code Z07 (B7 armoring on special protection version) | Model 223 with code Z07 (B7 armoring on special protection version) except code 490 (Electrohydraulic suspension) | |
|---|---|---|---|---|
| BA32.20-P-1002-02O | Nut, torsion bar linkage to steering knuckle | Nm | 80 | 100 |