Unfasten/Fasten Cover For Seat Backrest On Front Seat - AR91.10-P-8656-03LW

Model 205, 238, 253 

Model 206, 214, 236, 254 

Model 213, 257, 290 

Model 223 

Model 294, 295, 296, 297 

Fastening type A 

Courtesy of MERCEDES-BENZ USA

Fastening type B 

Courtesy of MERCEDES-BENZ USA

Fastening type C 

Courtesy of MERCEDES-BENZ USA

Fastening type D 

Courtesy of MERCEDES-BENZ USA

Release 

1. Unhook staple wire (1) at retaining clip (2) with dismantling tool.

   For covers with fastening type A

2. Loosen velcro fastener (3) from velcro fastener (4).

   For covers with fastening type B

3. Unhook hook (5) on staple wire (6).

   For covers with fastening type C

4. Remove wire ring (7) on staple wire (8).

   For covers with fastening type D

   Carefully remove residue from wire rings (7).

   Otherwise damage may occur.

   Mount 

5. Hook in staple wire (1) at retaining clip (2) with dismantling tool.

   For covers with fastening type A

6. Fasten velcro fastener (3) on velcro fastener (4).

   For covers with fastening type B

7. Hook in hook (5) on staple wire (6).

   For covers with fastening type C

8. Fasten staple wire (8) with wire ring (7) on eyelet of seat backrest padding.

   For covers with fastening type D

   Insert open wire ring (7) (arrow A), as shown, into padding clip pliers and close completely by pressing together (arrow B).