Remove/Install Rear Seat Cushion Padding - AR91.12-P-1022S

Model 223

except code 223 (Electric backrest adjustment and head restraints)

except code 224 (Individual rear seats)

G16192728

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Move driver's and front passenger seat forward.
2	Lift seat cushion padding (1) at front and pull wire hoops (2) out of pilot bushings (arrows).	Do not bend wire hoops (2). Otherwise the wire hoops (2) can no longer be inserted correctly into the pilot bushings (arrows).
		Ensure that wire hoops (2) are correctly seated in pilot bushings (arrows).
3	Press seat cushion padding (1) at left and right towards rear and unhook wire hoops (4) upwards out of retaining hooks (3).	Ensure that wire hoops (4) are correctly seated in retaining hooks (3).
4	Fold over damping and unclip and disconnect electrical connectors (5).
5	Remove seat cushion padding (1).	Carefully remove seat cushion padding (1) from vehicle. Otherwise, surrounding vehicle parts may be damaged.
6	Install in the reverse order.