223 588 14 23 00 Data Sheet - WS60.00-P-0394K
Model 223.0/1
Use in FG 60/61/62/63/64/Set B/K
Purpose:
Vehicle-specific assembly information for setup of straightening bench for checking and repair of bodies according to Mercedes-Benz standard.
NOTE:
The analysis and attachment of all aluminum structural parts of the bodyshell is performed exclusively using the repair method described in WIS.
Technical Note:
In combination with W 000 588 04 23 00 body straightening system.
Procurement information:
Recommended workshop equipment and information about the manufacturers can be found in the WS document (see below).
Manufacturer 1:
CELETTE FRANCE SAS
3, Avenue Marcelin Berthelot
38200 Vienne
France
http://www.celette.com
- Basic straightening set: 7223.5A
- Basic portal straightening set: 7223.8A
- Measuring system: NAJA