000 588 03 39 00 Rivet Die - WS60.00-P-0386K
Model 223, 232, 294, 295, 296, 297
Use in FG 60/62/63/64/65/set K
Purpose:
Rivet insert for applying countersunk rivets.
Technical Note:
In combination with W 000 588 02 39 00 rivet press tool.
Procurement information:
This workshop equipment is not sold through the regular replacement part ordering process in GLC/LC, but instead directly through the manufacturer/supplier.
Recommended workshop equipment and information about the manufacturers/supplier are available in the maintenance system document (see below).
Manufacturer 1
Wielander & Schill
Siederstr. 50
78054 VS- Schwenningen
Germany
https://www.wielanderschill.com
- Type/model: Rivet die (C1+C16)
Article no.: 703492
Manufacturer 2
TKR Spezialwerkzeuge GmbH
Am Waldesrand 9-11
58285 Gevelsberg
Germany
https://www.tkr-powertools.com
- Type/model: Rivet die 9 mm
Article no.: WZS-TKR- 0000266