Frame Floor Torque Specifications - BA61.10-P-1000-01P
Model 223
MODIFICATION NOTES
| 24.05.2023 | Value changed: Screw, rear strut to rear cross member | Model 223 except code Z07 | |
| 11.10.2023 | Value changed: Screw, Front floor to Upper floor | Model 223 with code Z07 |
FRAME FLOOR
| Number | Designation | Model 223 except code Z07 | Model 223 with code Z07 | ||
|---|---|---|---|---|---|
| BA61.10-P-1001-01P | Screw, Center tunnel strut to body | Nm | 30 | 30 | |
| BA61.10-P-1002-01P | Screw, Rear tunnel strut/Diagonal Strut to body/Rear floor | Nm | 50 | 50 | |
| BA61.10-P-1003-01P | Screw/bolt, recess for spare wheel to body | Nm | 23 | 23 | |
| BA61.10-P-1004-01P | Bolt/Nut, Tensioning strap/Diagonal Strut to load compartment well/load floor | Nm | 50 | - | |
| BA61.10-P-1005-01P | Screw front strut to rear floor assembly | Nm | 20 | - | |
| BA61.10-P-1006-01P | Screw, front strut to rear cross member | Nm | 20 | - | |
| BA61.10-P-1007-01P | Screw, rear strut to front cross member/front cross section | Nm | 20 | - | |
| BA61.10-P-1008-01P | Screw, rear strut to rear cross member | Nm | 20 | 20 | |
| BA61.10-P-1009-01P | Screw, Cross member/Diagonal Strut to longitudinal member/front axle/side member | Nm | 50 | - | |
| BA61.10-P-1010-01P | Screw, wheel well guard plate to body | Nm | - | 28 | |
| BA61.10-P-1011-01P | Screw, Floor to body | Nm | - | 20 | |
| BA61.10-P-1012-01P | Screw, Front floor to Upper floor | Nm | - | 20 | |
| BA61.10-P-1013-01P | Screw, Front upper floor to body | Nm | - | 20 | |
| BA61.10-P-1014-01P | Bolt, front diagonal strut to front axle carrier/body/front diagonal strut | M8 | Nm | 17 | - |
| M10 | Nm | 50 | 50 | ||
| BA61.10-P-1015-01P | Screw/bolt, cross strut to rear elastomer bearing of rear axle carrier | Nm | 23 | 23 | |
| BA61.10-P-1016-01P | Screw, Diagonal strut to integral support | Nm | 50 | 50 | |
| BA61.10-P-1017-01P | Screw diagonal strut to bracket | Nm | 50 | 50 | |
| BA61.10-P-1018-01P | Screw, Stop plate on diagonal strut | Nm | 23 | - | |
| BA61.10-P-1019-01P | Screw, front strut to front strut | Nm | 17 | - | |
| BA61.10-P-1020-01P | Nut, support diagonal strut to stop plate | Nm | 50 | - | |
| BA61.10-P-1021-01P | Nut, mount/console rear axle spring to body | M8 | Nm | - | 28 |
| BA61.10-P-1022-01P | Nut, rear strut to power electronics holder | M10 | Nm | 36 | 36 |
| BA61.10-P-1023-01P | Screw control valve for low-temperature bracket to diagonal strut | Nm | 8 | - | |
| BA61.10-P-1024-01P | Screw, rear end floor to side wall | Nm | 50 | 55 | |
| BA61.10-P-1025-01P | Screw, reinforcement tube to longitudinal member (front) | Step 1 | Nm | 5 | 5 |
| Step 2 (loosen) | ∠° | 90 | 90 | ||
| Step 3 | Nm | 55 | 55 | ||
| BA61.10-P-1026-01P | Screw, reinforcement tube to longitudinal member (rear) | Nm | 55 | 55 | |
| BA61.10-P-1027-01P | Screw/Nut, retaining plate to body | Nm | - | 28 | |