Change Changeable Cover For Illuminated Door Sill Molding - AZ82.20-P-0009S

Model 223.0/1/9 

with code U45 (Illuminated door sill with exchangeable cover) 

Courtesy of MERCEDES-BENZ USA

Courtesy of MERCEDES-BENZ USA

Courtesy of MERCEDES-BENZ USA

	Remove
1	Carefully slide exchangeable cover (1) downwards (arrow A), pull downward from door sill (arrow B), then slide upwards (arrow C) and remove.	Carefully remove exchangeable cover (1). Otherwise, the paint at the entrance may be damaged. Long wedge	Fig 1
	Install
2	Hook retaining lugs of exchangeable cover (1) onto springs (arrow D) of front left illuminated door sill molding (E17/47) or right front illuminated door sill molding (E17/48) and push downward against the spring force (arrow E); while doing so, carefully press toward the door sill (arrow F) until the exchangeable cover (1) latches into place.	Carefully install exchangeable cover (1). Otherwise, the paint at the entrance may be damaged. Ensure that it is seated and arrest properly.
		Cleaner	*BR00.45-Z-1025-04A

Fig 1: Identifying Long Wedge (115 589 03 59 00)

Courtesy of MERCEDES-BENZ USA