Remove/Install Washer Fluid Reservoir Of Windshield Washer System - AR82.35-P-6000S
Model 223
Shown with code (874) MAGIC VISION CONTROL, heated
| Risk of fire and explosion caused by ignition of window washing fluid or antifreeze and their vapors. Risk of poisoning caused by swallowing window washing fluid or antifreeze or inhaling their vapors. Risk of injury or physical irritations caused by contact of window washing fluid or antifreeze with eyes, mucous membranes or skin. | Wear protective clothing and tight-fitting safety glasses. No open flames, fire or ignition sources. Avoid contact with eyes, mucous membranes and skin. When working with window washing fluids or antifreeze, do not eat, drink, or smoke. Do not inhale vapors and ensure sufficient ventilation in the working area. Store window washing fluid and antifreeze leakfree in safely closed original containers and out of the reach of children. | AS82.35-Z-0001-01A | |
| Risk of injury to skin and eyes suffering scalding from contact with hot coolantspray. Risk of poisoning from swallowing coolant. | Do not open cooling system unless coolant temperature is below 90°C. Open cap slowly and release the overpressure. Do not pour coolant into beverage containers. Wear protective gloves, protective clothing and safety glasses. |
AS20.00-Z-0001-01A | |
| Notice | Notes on coolant | AH20.00-P-2080-01KOA | |
| Remove/install | |||
| 1 | Remove left front wheel. | AR40.10-P-1102A | |
| 2 | Remove front left fender. | Model 223 Model 223.0/1 |
AR88.10-P-1005S |
| 3 | Seal lines (1) with clamps and remove from heat exchanger (2). | Model 223 with code 874 (MAGIC VISION CONTROL incl. heated windshield washer system) |
|
| Fig 1 | |||
| Fig 2 | |||
| 4 | Disconnect electrical connector (3). | ||
| 5 | Unclip electrical wiring harness (4) from washer fluid reservoir (6). | ||
| 6 | Remove pump for windshield washer system with lines connected and place to one side. | AR82.35-P-6002S | |
| 7 | Remove pump for LiDAR cleaning system with lines connected and place to one side. | Model 223 with code 200 (Conditionally automated driving) |
AR54.71-P-0009S |
| 8 | Remove screw (5). | *BA82.35-P-1001-01C | |
| 9 | Remove washer fluid reservoir (6). | ||
| 10 | Install in the reverse order. | ||
| Check | |||
| 11 | Check coolant level and correct. | Model 223 with code 874 (MAGIC VISION CONTROL incl. heated windshield washer system) |
|
| Model 223 with engine 176, 256, 656 with code 874 (MAGIC VISION CONTROL incl. heated windshield washer system) |
AP20.30-P-2050P | ||
| 12 | Check/correct fluid level of windshield washer system. | ||
| AP82.35-P-8210I | |||
| 13 | Perform function check of the windshield washer system. | ||
| AP82.35-P-8252J |
WINDSHIELD WASHER SYSTEM
| Number | Designation | Model 223 | |
|---|---|---|---|
| BA82.35-P-1001-01C | Bolt, washer fluid reservoir to bracket | Nm | 8 |