Remove/Install Armrest - AR91.12-P-1744S

Model 223 

except code 223 (Electric backrest adjustment and head restraints) 

except code 224 (Individual rear seats) 

Model 223 

with code 223 (Electric backrest adjustment and head restraints) 

except code 224 (Individual rear seats) 

except code Z07 (B7 armoring on special protection version) 

Shown with code 223 (Electric rear seat backrest adjustment and head restraints) 

Courtesy of MERCEDES-BENZ USA

Courtesy of MERCEDES-BENZ USA

Shown except code 223 (Electric rear seat backrest adjustment and head restraints) 

Notice	Information on preventing damage to electronic components due to electrostatic discharge		AH54.00-P-0001-01A
	Remove/install
1.1	Remove backrest in rear passenger compartment.	Model 223 except code 223 (Electric backrest adjustment and head restraints) except code 224 (Individual rear seats)
			AR91.12-P-1713S
1.2	Remove left and right seat backrest in rear passenger compartment.	Model 223 with code 223 (Electric backrest adjustment and head restraints) except code 224 (Individual rear seats) except code Z07 (B7 armoring on special protection version)
			AR91.12-P-1713SA
2	Remove center rear seat cushion padding.	Model 223 with code 223 (Electric backrest adjustment and head restraints) except code 224 (Individual rear seats) except code Z07 (B7 armoring on special protection version)
			AR91.12-P-1023S
3	Disconnect electrical connectors (1).	The number of electrical connectors (1) varies depending on the vehicle equipment.
4	Unhook fabric cover (4).
5	Expose electrical wiring harnesses of armrest (2).	The number of electrical lines varies depending on the vehicle equipment.
6	Remove screw/bolts (3).	Screw, rear seat armrest to rear panel at bottom	*BA91.12-P-1004-03L
7	Remove armrest (2).
8	Install in the reverse order.