Remove/Install Limit Switch For Hood - AR54.25-P-0012S

Model 223 

Courtesy of MERCEDES-BENZ USA

	Notes on safety-relevant components		AH00.00-Z-0019-01A
	Remove/install
1	Open hood, position vertically.
2	Remove bolts (1).	Screw, hood catch lower part to front module	*BA62.30-P-1010-01G
3	Remove hood catch lower part (2) upward until hood cable (3) and electrical connector (4) are accessible.
4	Unhook hood cable (3) from hood catch lower part (2).
5	Release and disconnect electrical connector (4) and remove hood catch lower part (2) together with hood contact switch (S62/42, S62/43).
6	Unclip hood contact switch (S62/42, S62/43) from hood catch lower part (2).
7	Install in the reverse order.

CROSS MEMBER AND FRONT REINFORCEMENT

Number	Designation		Model 223
BA62.30-P-1010-01G	Screw, hood catch lower part to front module	Nm	11