Remove/Install 12 V Socket - AR54.10-P-1009S

Model 223 

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Switch off ignition and store transmitter key outside of transmitter range (min. 2 m).
2	Open front door on front passenger side.
3	Open flap (1).
4	Release 12 V socket (X58/20x1) using pull-off device (2) and pull out far enough until electrical connector is accessible.	Do not crush or kink or subject electric lines to tension. Otherwise, the electric lines will be damaged, which will impair their function.
		Extraction tool	Fig 1
5	Disconnect electrical connector from 12 V socket (X58/20x1).
6	Unclip and remove clamping sleeve (3) by pushing back the two catch hooks (arrows).	When replacing 12 V socket (X58/20x1).
7	Install in the reverse order.

Fig 1: Identifying Extraction Tool (000 589 81 33 00)

Courtesy of MERCEDES-BENZ USA