Remove/Install Driver's Side Fuse And Relay Module - AR54.15-P-0003S

Model 223 

Fig 1: Driver's Side Fuse And Relay Module Components Location - Model 223

Courtesy of MERCEDES-BENZ USA

Topical note	Information on preventing damage to electronic components due to electrostatic discharge		AH54.00-P-0001-01A
	Notes on safety-relevant components		AH00.00-Z-0019-01A
	Remove/install
1	Detach ground line of on-board electrical system battery.		AR54.10-P-0051S
2	Remove instrument panel cover on driver's side.	Dismantling tool	Fig 2
3	Release fuse and relay module (F152/1) at catches (arrows) and remove.
4	Disconnect all electrical connectors and electric lines from fuse and relay module (F152/1).	The number of electrical connectors may vary depending on the equipment.
5	Unclip all fuse holders from fuse and relay module (F152/1) and place to one side.
6	Remove fuse and relay module (F152/1).
7	Change fuses and relays.	When replacing fuse and relay module (F152/1).
8	Install in the reverse order.

Fig 2: Identifying Dismantling Tool (000 589 95 63 00)

Courtesy of MERCEDES-BENZ USA