Remove/Install Fire Extinguisher With Bracket - AR86.10-S-5110E

Model 447 

Possible installation locations for fire extinguisher (1) 

Courtesy of MERCEDES-BENZ USA

Courtesy of MERCEDES-BENZ USA

Shown on driver seat 

Courtesy of MERCEDES-BENZ USA

Shown on rotary passenger seat 

Courtesy of MERCEDES-BENZ USA

Shown on right side of rear passenger bench seat 

Shown on left D-pillar 

Courtesy of MERCEDES-BENZ USA

Notice	Notes on carrying out repair work in the vehicle interior		AH68.00-D-0001-01KOS
	Remove/install
1	Open lock (3) and remove fire extinguisher (1)	The installation location of the fire extinguisher (1) varies according to the model, version and weight. If fire extinguisher (1) is replaced: ↓ Dispose of fire extinguisher (1) properly. Observe national peculiarities.
2	Unscrew bolts (4) and remove bracket (2)
3	Unscrew bolts (7) and remove bracket (5)	When removing bracket (5) on driver seat or rotary passenger seat. Model 447.7/8 with code SB6 (Luxury co-driver's seat, pivoting) Observe assembly position of spacer sleeves (6).
4	Install in the reverse order