Blind Spot Assist Wiring Diagram - PE54.71-S-2100-97VVD
Model 447.6 with code JA7 (Blind Spot Monitoring) with code XM0 (Facelift) except code M8E (Electric motor 85 kW/battery 60 kWh (usable)) except code ME0 (Electric motor 85 kW) except code XM7 (MOPF II) B161/3, B161/4
Model 447.7 with code JA7 (Blind Spot Monitoring) with code XM0 (Facelift) except code M7E (Electric motor 150 kW/battery 60 kWh (usable)) except code ME0 (Electric motor 85 kW) except code ME4 (Electric motor 145 kW) except code XM7 (MOPF II) B161/3, B161/4
| Code: | Designation: | Position: |
|---|---|---|
| A0 | Color code key | 40L |
| B161/3 | Left rear Blind Spot Assist radar sensor | 20A |
| B161/3 | Left rear Blind Spot Assist radar sensor | 30A |
| B161/4 | Right rear Blind Spot Assist radar sensor | 24A |
| B161/4 | Right rear Blind Spot Assist radar sensor | 36A |
| CAN G | Front end CAN | 4K |
| Code L | Valid for left-hand drive vehicles | 11G |
| Code Q22 | Trailer hitch with non-removable ball head | 6C |
| Code Q22 | Trailer hitch with non-removable ball head | 2C |
| Code Q24 | NAFTA trailer crossmember, towing capacity 5000Ibs | 6C |
| Code Q24 | NAFTA trailer crossmember, towing capacity 5000Ibs | 2C |
| Code Q50 | Trailer hitch with removable ball head | 6D |
| Code Q50 | Trailer hitch with removable ball head | 2D |
| Code R | Valid for right-hand drive vehicles | 12G |
| K40/11 | Firewall fuse and relay module | 12L |
| K40/11f90 | Fuse 90 | 11K |
| W29/10 | Right D-pillar ground point | 6L |
| X225/1x1 | Main wiring harness/firewall main wiring harness 1 electrical connector | 12H |
| X304 | Front end CAN (CAN G) potential distributor electrical connector | 4L |
| X326x1 | Rear bumper Blind Spot Monitoring electrical connector 1 | 14E |
| X35/111x1 | Main wiring harness/rear bumper Blind Spot Monitoring electrical connector | 6E |
| Z268 | Blind Spot Assist ground connection end sleeve | 24F |
| Z268 | Blind Spot Assist ground connection end sleeve | 35F |
| Z268/1 | Blind Spot Assist tml. 15 connector sleeve | 25F |
| Z268/1 | Blind Spot Assist tml. 15 connector sleeve | 36F |
| Z37/95 | Front-end CAN (CAN G) low end sleeve | 19F |
| Z37/95 | Front-end CAN (CAN G) low end sleeve | 29F |
| Z37/96 | Front-end CAN (CAN G) high end sleeve | 18E |
| Z37/96 | Front-end CAN (CAN G) high end sleeve | 28E |