(Wiring Diagram, Battery, Power Supply - PE54.10-S-2000-97VMA)
Model 447.6/7 with Code ME0 (Electric motor 85 kW) except Code XM7 (MOPF II)
Model 447.6 with Code M8E (Electric motor 85 kW/battery 60 kWh (usable)) except Code XM7 (MOPF II)
Model 447.7 with Code M7E (Electric motor 150 kW/battery 60 kWh (usable)) except Code XM7 (MOPF II)
Model 447.7 with Code ME4 (Electric motor 145 kW) except Code XM7 (MOPF II)
| Code : | Designation: | Position: |
|---|---|---|
| A0 | Color Code key | 23L |
| B95 | Battery sensor | 5L |
| Code M7E | Electric motor 150 kW/battery 60 kWh (usable) | 16H |
| Code M8E | Electric motor 85 kW/battery 60 kWh (usable) | 16J |
| Code ME0 | Electric motor 85 kW | 11H |
| Code ME4 | Electric motor 145 kW | 16H |
| F1 | Pre-fuse box | 4A |
| F1 | Pre-fuse box | 12A |
| F1 | Pre-fuse box | 18A |
| F1fE2 | Pre-fuse E2 | 16C |
| G1 | On-board electrical system battery | 3L |
| N10/1 | Signal acquisition and actuation module (SAM) control unit | 9L |
| N83/3 | DC/DC converter control unit | 13L |
| N83/3 | DC/DC converter control unit | 18L |
| W10 | Battery ground point | 5F |
| X202/1 | Pre-fuse box/alternator electrical distributor rail | 15F |
| X202/2 | Pre-fuse box/starter electrical distributor rail | 15G |