LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2021 >> Metris Van Cargo >> Repair and Diagnosis >> Electrical >> Motors, Switches, Relays >> Electrical System, Equipment & Instruments (06 Of 11) -- 447 Chassis >> Basic Knowledge >> Start-Off Assist, Basic Function - GF54.65-S-1005A

Start-Off Assist, Basic Function - GF54.65-S-1005A

Model All (Light transporter) 

With Code EZ5 (Active Parking Assist with reversing camera) 

Model All (Light transporter) 

With Code EZ6 (Parking package with 360-degree camera) 

Model All (Light transporter) 

With Code EZ7 (Active Parking Assist) 

Model All (Light transporter) 

With Code JB6 (Parking package with 360-degree camera) 

Model All (Light transporter) 

With Code JB7 (Parking Package with reversing camera) 

Overview 

This document contains information on:

General 

The starting-off aid can prevent collisions with obstacles in the direction of travel or minimize their effects when starting off. This can easily happen if the accelerator and brake pedal are mixed up or if the wrong direction of travel is assumed. The starting-off aid is controlled using the multimedia system. On vehicles with manual transmission, start-off assistance is not available.

Function requirements 

Function 

If, when starting off (drive range change to "R" or "D"), an obstacle is detected within an area of approx. 1 m, the speed is limited to approx. 2 km/h. This helps to minimize the consequences of a potential collision. When this process is active, it is indicated by a symbol in the central display.

Functional restrictions: 

  Function schematics     
  Start-off assistance, function schematic Model 447 with code EZ7 (Active Parking Assist) with code XM7 (MOPF II) PE54.65-S-2505-97A
  Additional basic functions     
  Torque coordination, basic function   GF07.10-S-1060A
  Gearshift system, basic function Model all with transmission 700.800
with code EZ7 (Active Parking Assist)
GF27.60-S-1002A
  Environment monitoring, basic function   GF54.65-S-1000A