LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2021 >> Metris Van Cargo >> Repair and Diagnosis >> Electrical >> Motors, Switches, Relays >> Electrical System, Equipment & Instruments (05 Of 11) -- 447 Chassis >> Basic Knowledge >> Caravan Control Unit Vehicle Status, Function - GF54.21-D-5049TSA

Caravan Control Unit Vehicle Status, Function - GF54.21-D-5049TSA

Model 447 

with code JA3 (Intelligent body control.) 

with code XM7 (MOPF II) 

Model 907, 910 

with code JA3 (Intelligent body control.) 

General 

The MB Advanced Control, control unit (N175) can read out the following vehicle statuses:

Status of central locking system 

The MBAC can read out the current status of the vehicle's central locking system (unlocked or locked). For this, the parameterizable special module (PSM) control unit (N26/15) must be connected to MBAC via the body manufacturer CAN (CAN ABH).

The MBAC enables the user to read out the current status of the vehicle's central locking system (unlocked or locked). To do so, the parameterizable special module (PSM) control unit must be connected to the MBAC via the body manufacturer CAN.

Status of doors 

The MBAC can read out the status of each vehicle door (open or closed). To do so, the PSM must be connected to the MBAC via the body manufacturer CAN.

Language setting 

The MBAC can read out the current language setting from the PSM. To do so, the PSM must be connected to the MBAC via the body manufacturer CAN.

Time 

The MBAC can read out the current time from the PSM. To do so, the PSM must be connected to the MBAC via the body manufacturer CAN.

Date 

The MBAC can read out the current date from the PSM. To do so, the PSM must be connected to the MBAC via the body manufacturer CAN.

Ignition status 

The MBAC can read out the status of the vehicle ignition (ON or OFF). To do so, the PSM must be connected to the MBAC via the body manufacturer CAN.

Vehicle speed 

The MBAC can read out the current speed of the vehicle with a resolution of 1 km/h. To do so, the PSM must be connected to the MBAC via the body manufacturer CAN.

Status of windows 

The MBAC can read out the current status of each vehicle window. To do so, the PSM must be connected to the MBAC via the body manufacturer CAN.

  Overview of system components of caravan control unit Model 907, 910 GF54.21-D-9992TSA
  Overview of system components of caravan control unit Model 447 GF54.21-S-9992TMA