Caravan Control Unit Services For Additional Equipment, Function - GF54.21-D-5013TSA
Model 447
with code JA3 (Intelligent body control.)
with code XM7 (MOPF II)
Model 907, 910
with code JA3 (Intelligent body control.)
Appicals services
The Appicals devices are virtual additional devices that can display the MB Advanced Control, control unit (N175) on the output devices.
Appicals services (services for additional devices) are a basic function of the MBAC. The MBAC contains the following Appicals services:
- RGBOutput
- ActuatorOutput
- SensorInput
- DigitalOutput
- RelativeOutput
- StateOutput
- RelativeInput
- DigitalInput
RGBOutput
The MBAC can perform the Appicals I/O service RGBOutput for each virtual Appicals device of the MBAC. To do so, the Appicals device of the MBAC must have the Appicals I/O service RGBOutput.
The MBAC can read out the value "Actv" (TRUE or FALSE) for each virtual Appicals device of the MBAC. To do so, the Appicals device of the MBAC must have the Appicals I/O service RGBOutput.
The MBAC can set the value "Actv" (TRUE or FALSE) for each virtual Appicals device of the MBAC. To do so, the Appicals device of the MBAC must have the Appicals I/O service RGBOutput.
The MBAC can read out the value "Red" in the range from 0 to 255 with an accuracy of 1 for each virtual Appicals device of the MBAC. To do so, the Appicals device of the MBAC must have the Appicals I/O service RGBOutput.
The MBAC can set the value "Red" in the range from 0 to 255 with an accuracy of 1 for each virtual Appicals device of the MBAC. To do so, the Appicals device of the MBAC must have the Appicals I/O service RGBOutput.
The MBAC can read out the value "Green" in the range from 0 to 255 with an accuracy of 1 for each virtual Appicals device of the MBAC. To do so, the Appicals device of the MBAC must have the Appicals I/O service RGBOutput.
The MBAC can set the value "Green" in the range from 0 to 255 with an accuracy of 1 for each virtual Appicals device of the MBAC. To do so, the Appicals device of the MBAC must have the Appicals I/O service RGBOutput.
The MBAC can read out the value "Blue" in the range from 0 to 255 with an accuracy of 1 for each virtual Appicals device of the MBAC. To do so, the Appicals device of the MBAC must have the Appicals I/O service RGBOutput.
The MBAC can set the value "Blue" in the range from 0 to 255 with an accuracy of 1 for each virtual Appicals device of the MBAC. To do so, the Appicals device of the MBAC must have the Appicals I/O service RGBOutput.
ActuatorOutput
The MBAC can perform the Appicals I/O service ActuatorOutput for each virtual Appicals device of the MBAC. To do so, the Appicals device of the MBAC must have the Appicals I/O service ActuatorOutput.
The MBAC can read out the value "Actv" (TRUE or FALSE) for each virtual Appicals device of the MBAC. To do so, the Appicals device of the MBAC must have the Appicals I/O service ActuatorOutput.
The MBAC can set the value "Actv" (TRUE or FALSE) for each virtual Appicals device of the MBAC. To do so, the Appicals device of the MBAC must have the Appicals I/O service ActuatorOutput.
The MBAC can set the variable unit, Unit for each virtual Appicals device of the MBAC. To do so, the Appicals device of the MBAC must have the Appicals I/O service ActuatorOutput.
The MBAC can set the variable type. Type for each virtual Appicals device of the MBAC. To do so, the Appicals device of the MBAC must have the Appicals I/O service ActuatorOutput.
The MBAC can set the "MinLimit" value for each virtual Appicals device for the MBAC. To do so, the Appicals device of the MBAC must have the Appicals I/O service ActuatorOutput.
The MBAC can read out the "MinLimit" value for each virtual Appicals device of the MBAC. To do so, the Appicals device of the MBAC must have the Appicals I/O service ActuatorOutput.
The MBAC can set the "MaxLimit" value for each virtual Appicals device for the MBAC. To do so, the Appicals device of the MBAC must have the Appicals I/O service ActuatorOutput.
The MBAC can read out the "MaxLimit" value for each virtual Appicals device of the MBAC. To do so, the Appicals device of the MBAC must have the Appicals I/O service ActuatorOutput.
The MBAC can set the "Trgt" value for each virtual Appicals device for the MBAC. To do so, the Appicals device of the MBAC must have the Appicals I/O service ActuatorOutput.
The MBAC can read out the "Trgt" value for each virtual Appicals device for the MBAC. To do so, the Appicals device of the MBAC must have the Appicals I/O service ActuatorOutput.
The MBAC can set the "Current" value for each virtual Appicals device of the MBAC. To do so, the Appicals device of the MBAC must have the Appicals I/O service ActuatorOutput.
The MBAC can read out the "Current" value for each virtual Appicals device of the MBAC. To do so, the Appicals device of the MBAC must have the Appicals I/O service ActuatorOutput.
SensorInput
The MBAC can perform the Appicals I/O service SensorInput for each virtual Appicals device of the MBAC. To do so, the Appicals device of the MBAC must have the Appicals I/O service SensorInput.
The MBAC can set the variable unit, Unit for each virtual Appicals device of the MBAC. To do so, the Appicals device of the MBAC must have the Appicals I/O service SensorInput.
The MBAC can set the variable type. Type for each virtual Appicals device of the MBAC. To do so, the Appicals device of the MBAC must have the Appicals I/O service SensorInput.
The MBAC can set the "Value" value for each virtual Appicals device of the MBAC. To do so, the Appicals device of the MBAC must have the Appicals I/O service SensorInput.
The MBAC can read out the "Value" value for each virtual Appicals device of the MBAC. To do so, the Appicals device of the MBAC must have the Appicals I/O service SensorInput.
The MBAC can set the "MinLimit" value for each virtual Appicals device for the MBAC. To do so, the Appicals device of the MBAC must have the Appicals I/O service SensorInput.
The MBAC can read out the "MinLimit" value for each virtual Appicals device of the MBAC. To do so, the Appicals device of the MBAC must have the Appicals I/O service SensorInput.
The MBAC can set the "MaxLimit" value for each virtual Appicals device for the MBAC. To do so, the Appicals device of the MBAC must have the Appicals I/O service SensorInput.
The MBAC can read out the "MaxLimit" value for each virtual Appicals device of the MBAC. To do so, the Appicals device of the MBAC must have the Appicals I/O service SensorInput.
DigitalOutput
The MBAC can perform the Appicals I/O service DigitalOutput for each virtual Appicals device of the MBAC. To do so, the Appicals device of the MBAC must have the Appicals I/O service DigitalOutput.
The MBAC can read out the value "State" (TRUE or FALSE) for each virtual Appicals device of the MBAC. To do so, the Appicals device of the MBAC must have the Appicals I/O service DigitalOutput.
The MBAC can set the value "State" (TRUE or FALSE) for each virtual Appicals device of the MBAC. To do so, the Appicals device of the MBAC must have the Appicals I/O service DigitalOutput.
RelativeOutput
The MBAC can perform the Appicals I/O service RelativeOutput for each virtual Appicals device of the MBAC. To do so, the Appicals device of the MBAC must have the Appicals I/O service RelativeOutput.
The MBAC can read out the value "Actv" (TRUE or FALSE) for each virtual Appicals device of the MBAC. To do so, the Appicals device of the MBAC must have the Appicals I/O service RelativeOutput.
The MBAC can set the value "Actv" (TRUE or FALSE) for each virtual Appicals device of the MBAC. To do so, the Appicals device of the MBAC must have the Appicals I/O service RelativeOutput.
The MBAC can read out "Val" as a value in the range from 0 to 1000 with an accuracy of 1 for each virtual Appicals device of the MBAC. To do so, the Appicals device of the MBAC must have the Appicals I/O service RelativeOutput.
The MBAC can set "Val" as a value in the range from 0 to 1000 with an accuracy of 1 for each virtual Appicals device of the MBAC. To do so, the Appicals device of the MBAC must have the Appicals I/O service RelativeOutput.
StateOutput
The MBAC can perform the Appicals I/O service StateOutput for each virtual Appicals device of the MBAC. To do so, the Appicals device of the MBAC must have the Appicals I/O service StateOutput.
The MBAC can set the "Res" value as a string for each virtual Appicals device for the MBAC. To do so, the Appicals device of the MBAC must have the Appicals I/O service StateOutput.
The MBAC can read out the "Res" value as a string for each virtual Appicals device for the MBAC. To do so, the Appicals device of the MBAC must have the Appicals I/O service StateOutput.
The MBAC can read out the value "ListEventID" in the range from 0 to 255 with an accuracy of 1 for each virtual Appicals device of the MBAC. To do so, the Appicals device of the MBAC must have the Appicals I/O service StateOutput.
The MBAC can set the value "ListEventID" in the range from 0 to 255 with an accuracy of 1 for each virtual Appicals device of the MBAC. To do so, the Appicals device of the MBAC must have the Appicals I/O service StateOutput.
The MBAC can read out the value "Cnt" in the range from 0 to 255 with an accuracy of 1 for each virtual Appicals device of the MBAC. To do so, the Appicals device of the MBAC must have the Appicals I/O service StateOutput.
The MBAC can set the value "Cnt" in the range from 0 to 255 with an accuracy of 1 for each virtual Appicals device of the MBAC. To do so, the Appicals device of the MBAC must have the Appicals I/O service StateOutput.
The MBAC can read out the value "StateIDx" in the range from 0 to 255 with an accuracy of 1 for each virtual Appicals device of the MBAC. To do so, the Appicals device of the MBAC must have the Appicals I/O service StateOutput.
The MBAC can set the value "StateIDx" in the range from 0 to 255 with an accuracy of 1 for each virtual Appicals device of the MBAC. To do so, the Appicals device of the MBAC must have the Appicals I/O service StateOutput.
The MBAC can set the "State" value as a string for each virtual Appicals device for the MBAC. To do so, the Appicals device of the MBAC must have the Appicals I/O service StateOutput.
The MBAC can read out the "State" value as a string for each virtual Appicals device for the MBAC. To do so, the Appicals device of the MBAC must have the Appicals I/O service StateOutput.
RelativeInput
The MBAC can perform the Appicals I/O service RelativeInput for each virtual Appicals device of the MBAC. To do so, the Appicals device of the MBAC must have the Appicals I/O service RelativeInput.
The MBAC can read out "Value" as a value in the range from 0 to 1000 with an accuracy of 1 for each virtual Appicals device of the MBAC. To do so, the Appicals device of the MBAC must have the Appicals I/O service RelativeInput.
The MBAC can set "Value" as a value in the range from 0 to 1000 with an accuracy of 1 for each virtual Appicals device of the MBAC. To do so, the Appicals device of the MBAC must have the Appicals I/O service RelativeInput.
DigitalInput
The MBAC can perform the Appicals I/O service DigitalInput for each virtual Appicals device of the MBAC. To do so, the Appicals device of the MBAC must have the Appicals I/O service DigitalInput.
The MBAC can read out the value "State" (TRUE or FALSE) for each virtual Appicals device of the MBAC. To do so, the Appicals device of the MBAC must have the Appicals I/O service DigitalInput.
The MBAC can set the value "State" (TRUE or FALSE) for each virtual Appicals device of the MBAC. To do so, the Appicals device of the MBAC must have the Appicals I/O service DigitalInput.
| Caravan control unit illustration of additional equipment, function | GF54.21-D-5012TSA | ||
| Caravan control unit conforming additional equipment, function | GF54.21-D-5014TSA | ||
| Overview of system components of caravan control unit | Model 907, 910 | GF54.21-D-9992TSA | |
| Overview of system components of caravan control unit | Model 447 | GF54.21-S-9992TMA |