Caravan Control Unit Light Control, Function - GF54.21-D-5037TSA

Model 447 

with code JA3 (Intelligent body control.) 

with code XM7 (MOPF II) 

Model 907, 910 

with code JA3 (Intelligent body control.) 

General 

Control is a basic function of the MB Advanced Control, control unit (N175).

The MBAC can control two light circuits:

• White light circuit
• RGB light circuit

Pulse width modulation (PWM)

White light circuit 

The MBAC can set the brightness of a dimmable illuminant between 0 % and 100% with a resolution of 0.1 %. To do so, an illuminant must be connected to the "DO_PWM_Weiss1_Dimmer" interface of the MBAC and be controllable.

The MBAC enables the user to set the brightness of a dimmable illuminant between 0 % and 100 % with a resolution of 0.1 %. To do so, an illuminant must be connected to the "DO_PWM_Weiss1_Dimmer" interface of the MBAC and be controllable.

The MBAC enables the user to set the status of a dimmable illuminant (switched on or off) using the pushbutton switch. To do so, an illuminant must be connected to the "DO_PWM_Weiss1_Dimmer" interface of the MBAC and be controllable, and a pushbutton switch must be connected to the "DI_Lichtkreis_Weiss1_Pushbutton switch" interface and be controllable.

The MBAC can set the brightness of a dimmable illuminant between 0 % and 100% with a resolution of 0.1 %. To do so, an illuminant must be connected to the "DO_PWM_Weiss2_Dimmer" interface of the MBAC and be controllable.

The MBAC enables the user to set the brightness of a dimmable illuminant between 0 % and 100 % with a resolution of 0.1 %. To do so, an illuminant must be connected to the "DO_PWM_Weiss2_Dimmer" interface of the MBAC and be controllable.

The MBAC enables the user to set the status of a dimmable illuminant (switched on or off) using the pushbutton switch. To do so, an illuminant must be connected to the "DO_PWM_Weiss2_Dimmer" interface of the MBAC and be controllable, and a pushbutton switch must be connected to the "DI_Lichtkreis_Weiss2_Pushbutton switch" interface and be controllable.

The MBAC can set the brightness of a dimmable illuminant between 0 % and 100% with a resolution of 0.1 %. To do so, an illuminant must be connected to the "DO_PWM_Weiss3_Dimmer" interface of the MBAC and be controllable.

The MBAC enables the user to set the brightness of a dimmable illuminant between 0 % and 100 % with a resolution of 0.1 %. To do so, an illuminant must be connected to the "DO_PWM_Weiss3_Dimmer" interface of the MBAC and be controllable.

The MBAC enables the user to set the status of a dimmable illuminant (switched on or off) using the pushbutton switch. To do so, an illuminant must be connected to the "DO_PWM_Weiss3_Dimmer" interface of the MBAC and be controllable, and a pushbutton switch must be connected to the "DI_Lichtkreis_Weiss3_Pushbutton switch" interface and be controllable.

RGB light circuit 

The MBAC can set the intensity of the red color channel of the illuminant between 0 % and 100% with a resolution of 0.1 %. To do so, an illuminant must be connected to the "DO_PWM_RGB_RGB_Red" interface and the red color channel of the illuminant must be controlled separately.

The MBAC enables the user to set the intensity of the red color channel of the illuminant between 0 % and 100 % with a resolution of at least 0.1 %. To do so, an illuminant must be connected to the "DO_PWM_RGB_RGB_Red" interface and the red color channel of the illuminant must be controlled separately.

The MBAC can set the intensity of the green color channel of the illuminant between 0 % und 100 % with a resolution of at least 0.1 %. To do so, an illuminant must be connected to the "DO_PWM_RGB_RGB_Green" interface and the green color channel of the illuminant must be controlled separately.

The MBAC enables the user to adjust the intensity of the green color channel of the illuminant between 0 % and 100 % with a resolution of at least 0.1 %. To do so, an illuminant must be connected to the "DO_PWM_RGB_RGB_Green" interface and the green color channel of the illuminant must be controlled separately.

The MBAC can set the intensity of the blue color channel of the illuminant between 0 % und 100 % with a resolution of at least 0.1 %. To do so, an illuminant must be connected to the "DO_PWM_RGB_RGB_Blue" interface and the blue color channel of the illuminant must be controlled separately.

The MBAC enables the user to set the intensity of the blue color channel of the illuminant between 0 % and 100 % with a resolution of at least 0.1 %. To do so, an illuminant must be connected to the "DO_PWM_RGB_RGB_Blue" interface and the blue color channel of the illuminant must be controlled separately.

	Caravan control unit light status, function		GF54.21-D-5038TSA
	Overview of system components of caravan control unit	Model 907, 910	GF54.21-D-9992TSA
	Overview of system components of caravan control unit	Model 447	GF54.21-S-9992TMA