Parameterizable Interface, PSM Function - GF54.21-S-3052TRA
Model 447
With Code ED5 (Parameterisable special module)
Except Code XM7 (MOPF II)
Model 448
With Code ED5 (Parameterisable special module)
Except Code XM7 (MOPF II)
Coding interface
A standardized diagnostic connector is used for coding and reading out signal pool signals.
The CAN Calibration Protocol (CCP) is not supported.
The description of the diagnosis services is exchanged in a Candela file.
| Parameterizable special module (PSM) control unit component description | GF54.21-S-5005TRA | ||
| Overview of system components for parameterizable special module (PSM) | GF54.21-S-9998TRA |