Parameterizable Special Module (PSM) Signals - GF54.21-D-0002-05TSB

Model 447, 448 

With Code ED5 (Parameterisable special module) 

With Code XM7 (MOPF II) 

Model 907, 910 

With Code ED5 (Parameterisable special module) 

With Code XJ4 (Modification year G4-I) 

The signal list is part of the documentation for the parameterizable special module (PSM) but can also be displayed in XENTRY Diagnosis. Perform the following steps for display in XENTRY Diagnosis:

• Select parameterizable special module (PSM) control unit (N26/16) in XENTRY Diagnosis.
• Call up information on parameterizable special module (PSM) control unit (N26/16) (i.e. press button with book symbol).
• Select the "Help for control unit" tab.
• Select the menu item "Signal list".

The signals are grouped into the following categories in the signal list:

• ACU/OLU signals
• Alarm light function
• Arithmetic unit
• Outputs
• Exterior lighting function
• Bit-word converter
• CAN ABH signals
• CAN-B safety receive signals
• CAN-B receive signals
• CAN HMI-2 receive signals
• CAN K receive signals
• CAN K signals (ACU/OLU)
• Inputs
• ESP functions
• Window lifter functions
• "Wake-up status" functions
• Constants
• Marco Polo functions
• Measurement values
• Engine functions
• MPM-internal signals
• PSM status (request status)
• Safe test signals
• Sliding sunroof functions
• Sliding door function
• Other functions
• PLC function active
• PLC group xx
• Test signals
• Step control
• Variant coding
• Wiper function
• Word-bit Converter
• Central locking system functions