Subsequently Modify Antenna Line At Antenna Splitter For Audio 40 - AN82.85-S-0015-08E
Model 447.6/7
with code E1N (Becker® MAP PILOT)
Model 447.6/7
with code EV6 (Becker® MAP PILOT pre-installation)
| Notice | Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | |
| Notice | Notes on carrying out repair work in the vehicle interior | AH68.00-D-0001-01KOS |
- Disconnect antenna line (1) of FM, AM antenna amplifier (A2/18) at TMC antenna splitter (A28/13).
- Disconnect antenna line (2) of radio (audio) (N87/2) at TMC antenna splitter (A28/13).
- Remove white plug housing at antenna line (2).
Use basic wiring harness repair kit.
- Disconnect antenna line (3) of mount for Becker® MAP PILOT control unit (N41-1) at TMC antenna splitter (A28/13).
- Remove black plug housing at antenna line (3).
- Attach black plug housing to antenna line (2).
- Attach white plug housing to antenna line (3).
- Attach antenna line (3) to TMC antenna splitter (A28/13).
Antenna line (3) of mount for Becker® MAP PILOT control unit (N41-1) remains without function.
- Connect antenna line (1) of FM, AM antenna amplifier (A2/18) with black plug housing of antenna line (2).