Update Map Data Status For COMAND Navigation System - AP82.85-S-8252E
Model 447
With Code E1E (Navigation)
With Code E6H (MBUX multimedia system High)
Model 447
With Code E1E (Navigation)
With Code E6M (MBUX multimedia system Mid)
Model 447
With Code E1E (Navigation)
With Code E7H (MBUX multimedia system High)
Model 447
With Code EA2 (COMAND Online with 6-disc DVD changer)
Model 447
With Code EJ9 (COMAND Online)
Model 448
With Code EA2 (COMAND Online with 6-disc DVD changer)
Model 470, 471
With Code EJ9 (COMAND Online)
Model 907, 910
With Code E1E (Navigation)
With Code E3M (MBUX multimedia system with 7-inch touch screen)
Model 907, 910
With Code E4M (MBUX multimedia system with 10.25-inch touchscreen)
Model 907
With Code E1E (Navigation)
With Code E7M (MBUX multimedia system)
| Risk of fire /risk of explosion due to short circuit and escaping oxyhydrogen gas. Risk of (burn) injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte/mist, short circuit and arcing. Risk of poisoning caused by swallowing battery electrolyte or absorption of lead through the skin or body orifices. Risk of death due to voltage U >= 30 V AC and U >= 60 V DC. | No fires, sparks, open flames, or smoking. Wear acid-resistant gloves, clothing, and glasses. Pour battery acid only into suitable and appropriately marked containers. | AS54.10-Z-0001-01A | |
| Prepare update | |||
| 1 | Check whether the customer is entitled to a map update free of charge. | ||
| Service Information: Free map updates | Model 447, 470, 907, 910 with code EX9 (3 years' free-of-charge map update) | SI82.85-S-0051A | |
| 2 | Activation code for map update is available in Vehicle Documentation (VeDoc). | ||
| 3 | Connect charger to jump-start connection point. | ||
| 4 | Switch electronic ignition lock control unit (EZS) to position "1" (circuit 15R). | ||
| 5 | Switch on COMAND operating, display and controller unit (A40/3). | ||
| 6 | Connect Blu-ray™ player of vehicle diagnosis system to front USB ports of COMAND controller unit. | If a Blu-ray option is not available (update using Blu-ray is not available in every market), ↓ Carry out update using the master DVD or USB stick. |
|
| Update | |||
| 7.1 | Insert master-Blu-ray disc into external Blu-ray™ player of XENTRY Kit and update map data. | When updating using the master Blu-ray disc Call up update version through "Navi", "Options" and "Map version" menu. |
|
| 7.2 | Start menu for master USB flash drive and update map data. | With update using master USB stick The progress bar indicates how much has been completed. |
|
| 8.1 | Remove master Blu-ray disc from Blu-ray™ player and disconnect front USB ports. | After updating using the master Blu-ray disc | |
| 8.2 | Disconnect USB flash drive from front USB ports. | After updating using master USB stick | |
| 9 | Switch off COMAND operating, display and controller unit (A40/3). | ||
| 10 | Switch electronic ignition lock control unit (EZS) to position "0" (circuit 15R). | ||
| 11 | Disconnect charger. |