Toll System, Basic Function - GF82.88-S-9900A

Model All (Light transporter) 

Overview 

This document contains information on:

• General 
• Function requirements 
• Function 
  • ETC/"Hi-pass" 
  • China toll system 
  • Variants of control unit 

General 

The toll system records survey data on toll roads and transmits them to the toll recording system e.g. by radio data.

Currently, the ETC toll system in Japan, "Hi-Pass" in South Korea and the toll system in China are supported.

Electronic Toll Collection (ETC): toll system in Japan

"Hi-Pass": toll system in South Korea

Vehicle Information and Communication System (VICS)

Function requirements 

• Circuit 15R on
• The toll system is switched on.

  The toll system can be switched on and off in Japan and South Korea using the multimedia system control. In China, a Bluetooth® connection to the user's smartphone is required to activate the toll system.

• Japan, South Korea: The ETC/Hi-Pass card is located in the Dedicated Short-Range Communications (DSRC) control unit.
• China: The user carries a smartphone with activated access to the toll system with them. The DSRC control unit establishes a Bluetooth® connection to the user's smartphone.

Function 

Data is exchanged between the DSRC control unit and the toll station via the antenna for DSRC.

ETC/"Hi-pass" 

For data to be exchanged between the DSRC control unit and the toll station, the DSRC control unit requires an ETC/"Hi-Pass" card on which user data is stored. The DSRC control unit also stores evidence that fees have already been paid on the ETC/"Hi-Pass" card.

The DSRC control unit forwards messages in the toll system to the media display and to the speaker system via the multimedia system control.

For example, a message can be issued in the following cases:

• Payment completed successfully
• Fault in the communication with the tollbooth
• ETC/"Hi-Pass" card read error
• Error with ETC/"Hi-Pass" card reader
• ETC/"Hi-Pass" card not accepted
• ETC/"Hi-Pass" card not inserted
• No detailed information regarding the recent fee payments

The DSRC control unit is not installed ex factory, but is retrofitted in the corresponding countries before delivery. The antenna and the wiring harness are installed ex factory.

China toll system 

The Bluetooth® button on the DSRC control unit is used to establish a Bluetooth® connection to the user's smartphone. Display and operation is carried out via the user's smartphone.

Variants of control unit 

In the variants for Japan and South Korea, the DSRC control unit has the following specific properties:

• Integrated card reader for ETC/"Hi-Pass" card
• Only Japan: Receiving and forwarding VICS messages to the multimedia system control

In the variant for China, the DSRC control unit has the following specific properties:

• Integrated Bluetooth® interface
• Button for activating the Bluetooth® connection to the user's smartphone

	Component descriptions
	Toll system, component description	Model 447.8 with code EQ3 (Preinstallation: toll system) with code XM7 (MOPF II)	GF82.88-S-6000A