Replace Rubber And Other Spacers - AR67.30-S-4050-02E

Model 447 

Model 448 

1. Glue rubber spacer disks (A) to bonding surface on body flange in area of rear window or carrier plate of vent window.

   Rubber spacer disks (A) are available from EPC.

   Courtesy of MERCEDES-BENZ USA

   Courtesy of MERCEDES-BENZ USA

2. Install spacers (1) on body flange in area of rear window or carrier plate of vent window.

   Spacers (1) are available from EPC.

   Courtesy of MERCEDES-BENZ USA

   Courtesy of MERCEDES-BENZ USA

3. Install spacers (1) on body flange in area of side window.

   Spacers (1) are available from EPC.

   Courtesy of MERCEDES-BENZ USA