Remove/Install Outer Front Door Handle - AR72.10-S-2400E

Model 447 

Model 448 

Courtesy of MERCEDES-BENZ USA

Shown On driver side on Model 447.8 With Code FZ8 (Comfort opening and closing with IR remote control) 

	Remove/install
1	Remove grommet (1)
2	Pull out door handle (5) in direction of arrow (arrow A) and detach adjustment screw (2)	Loosen adjustment screw (2) until a perceptible resistance on the tool can be felt. Tighten adjustment screw (2) until a perceptible resistance on the tool can be felt.
3	Remove door lock cylinder (3) from front door
4	Disconnect electrical connection (4)	Model 447 with code FZ8 (Convenience opening and closing w. IR remote ctrl.) Model 448 with code FZ8 (Convenience opening and closing w. IR remote ctrl.) When removing door handle (5) on driver side.
5	Pull door handle (5) toward rear out of outer door handle bracket in direction of arrow (arrow B) and remove in direction of arrow (arrow C)
6	Remove seal (6)
7	Install in the reverse order
	Check
8	Check comfort opening and comfort closing feature for proper function	Model 447 with code FZ8 (Convenience opening and closing w. IR remote ctrl.) Model 448 with code FZ8 (Convenience opening and closing w. IR remote ctrl.)
9	Close rotary tumbler on door lock on driver side and check door lock cylinder (3) for proper function using emergency key