Prepare Trim On Liftgate When Replacing - AR72.20-S-0015-01E

Model 447.7 

With Code ZH6 (Marco Polo ACTIVITY) 

Prepare window frame paneling (1) 

Courtesy of MERCEDES-BENZ USA

1. Drill ø 8.8 mm hole for curtain rail (1.1) in window frame paneling (1) as shown.

   Dimensions (A, C) measured at 90° angle from outer edges of window frame paneling (1). A flexible measuring tape is laid directly on the window frame paneling (1).

2. Drill ø 4.2 mm holes for pins (1.2) in window frame paneling (1) as shown.

   Dimensions (B, D) "measured at 90° angle from outer edges of window frame paneling (1). A flexible measuring tape is laid directly on the window frame paneling (1).

3. Fasten pins (1.3) on window frame paneling (1) with blind rivet.

   Prepare liftgate paneling (2) 

   Courtesy of MERCEDES-BENZ USA

4. Drill ø 4.2 mm holes for pins (2.1) in liftgate paneling (2) as shown.

   Dimensions (G, H) measured at 90° angle from outer edge of liftgate paneling (2).

   Dimensions (E, F) measured at 90° angle from reference edge of inside of liftgate paneling (2).

5. Fasten pins (2.2) to liftgate paneling (2) with blind rivet.