LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2021 >> Metris Van Cargo >> Repair and Diagnosis >> Body & Frame >> Mirrors >> Interior Equipment -- 447 Chassis >> Testing & Repair >> Remove/Install Side Paneling On Dashboard - AR68.10-S-1503E

Remove/Install Side Paneling On Dashboard - AR68.10-S-1503E

Model 447, 448 

MODIFICATION NOTES

31.10.2023 Work procedure revised. Whole document.  

Shown On model 447.8 on left side of vehicle without code XM7 (facelift II) 

G16488166Courtesy of MERCEDES-BENZ USA

Shown On model 447.8 on left side of vehicle With Code XM7 (facelift II) 

G16488167Courtesy of MERCEDES-BENZ USA
Notice  Notes on carrying out repair work in the vehicle interior   AH68.00-D-0001-01KOS 
REMOVINGINSTALLING Remove/install     
1 Remove trim (1). IMPORTANT To do so, unclip the trim (1) and remove it in the direction of the arrow.
INSTALLATION IMPORTANT Check retaining clamps (2) for damage.
SPECIAL TOOL Long wedge
If damage is present:

Replace trim (1).
Fig 1
2 Install in the reverse order.    
Fig 1: Identifying Long Wedge (115 589 03 59 00)
G07070400Courtesy of MERCEDES-BENZ USA