Remove/Install Cover Below Instrument Panel (Left) - AR68.10-S-1500E
Model 447.6/7
With Code LC7 (Illumination for front footwell)
Model 447.8, 448
MODIFICATION NOTES
| 27.11.2023 | Work procedure revised. | The whole document |
Shown Except Code XM7 (facelift II)
Shown With Code XM7 (facelift II)
| Notice | Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | |
| Notice | Notes on carrying out repair work in the vehicle interior | AH68.00-D-0001-01KOS | |
| Remove/install | |||
| 1.1 | Remove screws (2) | Model 447.6/7 with code LC7 (Illumination for front footwell) except code XM7 (MOPF II) Model 447.8, 448 except code XM7 (MOPF II) |
|
| 1.2 | Unscrew screw (5). | Model 447.6/7 with code LC7 (Illumination for front footwell) with code XM7 (MOPF II) Model 447.8, 448 with code XM7 (MOPF II) |
|
| 2 | Release and disconnect the electrical connector (6) for the footwell lighting. | ||
| 3 | Release and disconnect the electrical connector (7) for the speaker. | Model 447, 448 with code JH3 (communication module (LTE) for digital services), model 447 with code JH4 (communication module (LTE) for ERA GLONASS) | |
| 4 | Remove the cover (1) from the holder (8). | Model 447, 448 with code XM7 (facelift II) |
Fig 1 |
| 5 | Remove cover (1). | Fig 1 | |
| 6 | Install in the reverse order. | ||
| Check | |||
| 7 | Test the function of the footwell lighting. | ||
| 8 | Test the function of the speaker. | Model 447, 448 with code JH3 (communication module (LTE) for digital services), model 447 with code JH4 (communication module (LTE) for ERA GLONASS) |